LSRAM30 CR
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Continuous Support Assembly, Profil bas, Pré-percé (PD), Classe MM (h6), Zinc Plated Steel Rail and 440C Shaft, Découpe à la longueur (CTL), Utiliser avec 30 mm Nominal Diameter Open Bushing Bearings
Lead Time:
Contact Factory
- Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
- These supports can be used horizontally or vertically.
- Low Shaft Rails allow the design of more compact linear motion systems
- Class MM (ISO h6 tolerance) Shaft included
- Y1=Y2 is standard. Special Y1 and overall length can be specified by customer.
- Bolt down from top
- Consists of zinc plated steel rail and 440C stainless steel LinearRace shafting (HRC 50 min.).
- LSRAs do not use standard predrilled, “T1” or "T2", shafting. The shafting uses a different hole pattern and configuration
- Use only with Super Smart Ball bushing bearings.
| Dimension | Valeur |
|---|---|
| [A] | 23 mm |
| [A1] | 11.5 mm |
| [A1] Tolérance | ± 0.002 mm |
| [A2] | ± 0.15 mm |
| [A2] | 11.7 mm |
| [d] Arbre, diamètre nominal | 30 mm |
| [H] | 30 mm |
| [H] Tolérance | ± 0.02 mm |
| [N] | 6.80 thru, 11.25 Dia C-Bore x 11.43 Deep |
| Boulon recommandé | M6 |
